A NSW Government website

Level 1 actions: routine camp management

Level 1 flying-fox camp management actions involve routine activities that improve the resilience or condition of the camp.

 

Level 1 routine camp management actions should not be carried out with the aim of damaging flying-fox habitat or killing, harming or dispersing/disturbing flying-foxes.

Routine camp management may include:

  • removing tree limbs or whole trees that pose a genuine health and safety risk, as determined by a qualified arborist
  • removing weeds, including removal of noxious weeds under the Biosecurity Act 2015 (previously the Noxious Weeds Act 1993) or species listed as undesirable by a council
  • minor trimming of shrubs and plants under trees or the planting vegetation
  • augmenting for the benefit of the roosting animals such as the planting of additional roost trees
  • mowing grass and similar grounds-keeping actions that will not create a major disturbance to roosting flying-foxes
  • applying mulch or removing leaf litter or other material on the ground.

Routine camp management actions should be developed as part of a camp management plan, using the camp management plan template (DOCX 355KB).

This page gives more information about routine camp management actions and should be read in conjunction with the Flying‑fox Camp Management Code of Practice 2018 (PDF 227KB) and the Flying‑fox Camp Management Policy 2015.

What should I consider before planning Level 1 management actions?

Do I need approvals or licences for Level 1 management actions?

How do I implement Level 1 management actions?

  • Clearly identify routine camp management actions as Level 1 camp management actions in the camp management plan.
    Download the camp management plan template (DOCX 355KB).
  • If needed, obtain licences and/or approvals from the Department of Climate Change, Energy, the Environment and Water, or comply with the Flying‑fox Camp Management Code of Practice 2018 (PDF 227KB).
  • Before starting minor works, conduct a health and safety risk assessment for the appropriate levels of personal protective equipment required and identify protocols to minimise risks to both the public and flying-foxes.
  • Workers should be made aware of the potential health risks associated with working with flying-foxes. Read the Hendra virus fact sheet.
  • If possible, start work in the area of the camp furthest from where the flying-foxes are roosting and working slowly towards the roost. Or you could leave the area nearest the flying-foxes until early evening.
  • If possible, minimise weed removal if it is likely to significantly affect the understorey microclimate of the tree canopy.
  • Minimise the use of loud machinery or equipment that produces sudden impacts or loud sounds.
  • If chainsaws are needed, start the chainsaw away from the roost and let it run for a short time to allow flying-foxes to adjust, then move closer to the flying-foxes and repeat the procedure.
  • If possible, park vehicles and equipment away from the direct line of sight of roosting flying-foxes.
  • Avoid using large crews. Consider engaging a 2-person crew, with one person undertaking Level 1 management actions, and the other acting as a 'spotter' to watch the activity of the flying-foxes. Work must stop at the first sign of flying-fox disturbance – that is, large numbers of flying-foxes taking flight.
  • Ensure that management actions and results are recorded to inform future planning.

Resources

Need help or more information?

The Department of Climate Change, Energy, the Environment and Water helps local government, public authority land managers and individual land holders to choose the right level of intervention for their situation. 

Email: flying.fox@environment.nsw.gov.au